Igor Artyukov | Carbon composites| Best Researcher Award

Published on by Global CAD Awards

Dr . Igor Artyukov | Carbon composites| Best Researcher Award

 Dr . Igor Artyukov ,P.N. Lebedev Physical Institute RAS,Russia

Dr. Igor Artyukov is a distinguished scientist at the P.N. Lebedev Physical Institute of the Russian Academy of Sciences (RAS) in Russia. Specializing in the field of physics, Dr. Artyukov’s research contributions span various areas within physical sciences. The P.N. Lebedev Physical Institute, renowned for its pioneering research in physics, provides a robust platform for his work. Dr. Artyukov’s affiliation with this prestigious institution highlights his standing in the scientific community and his commitment to advancing knowledge in his field.

 

Professional Profiles:

Scopus

Education 🎓

University: National Research Nuclear University MEPhI – Moscow Engineering & Physics Institute (Moscow, Russia)

  • Year of Graduation: 1988 (Honors Diploma)
  • Degree: M.Sc.
  • Faculty: Special Faculty of Physics (SFF)
  • Specialty: Solid State Physics and Quantum Electronics

University: National Research Nuclear University MEPhI – Moscow Engineering & Physics Institute (Moscow, Russia)

  • Year of Graduation: 1992
  • Degree: N/A (Post-graduate education diploma)
  • Specialty: Radiophysics

Management Training and Courses

  • Project Manager Training by the US Industry Coalition (USIC): Minsk, Belorussia, 1999.
  • Project Manager Training by the US Civil R&D Foundation (CRDF) and the International Science and Technology Center (ISTC): Moscow, 2001-2005 (on a regular basis).

Scientific Degree

Organization: P.N. Lebedev Physical Institute of the Russian Academy of Sciences (Moscow, Russia)

  • Degree: Ph.D.
  • Year: 1993
  • Specialty: Optics
  • Ph.D. Thesis: “X-ray Optics for Microscopy and Lithography”

Awards:

  • Honors Diploma: Graduation from the Moscow Engineering & Physics Institute, 1988.
  • Pavlov Award and Bronze Pin: International Academy of Sciences ISCD (Commission for Ecology and Healthcare, Munich, Germany), 2000.
  • Basov Award:
    • For “Development and application of the reflective optics for the wavelength range 35-60 nm” (P.N. Lebedev Physical Institute of the Russian Academy of Sciences), 2007.
    • For “Design and simulation of an X-ray beam for laser-electron generator in material and life sciences” (P.N. Lebedev Physical Institute of the Russian Academy of Sciences), 2017.
    • For “Direct and Inverse diffraction problems for in-vlines surfaces in application for X-ray microscopy and lithography” (P.N. Lebedev Physical Institute of the Russian Academy of Sciences), 2021.

Fields of Expertise:

Theoretical Studies:

  • Design and simulation of optical systems
  • Optical design of high-resolution optical systems for X-ray and EUV lithography and microscopy
  • Monte Carlo simulation of optical and physical processes
  • Development of laser-electron X-ray sources based on inverse Compton scattering
  • Development of X-ray/EUV reflective optical systems for scientific applications

Experimental Studies:

  • Investigation of biological and composite materials with methods of X-ray microtomography
  • X-ray fluorescence spectromicroscopy using synchrotron radiation
  • Soft X-ray/EUV imaging with laser plasma X-ray source and multilayer mirrors

Supervising:

  • K.M. Krymsky: M.Sc., Ph.D. student
  • S.A. Romanova: M.Sc., Ph.D. student
  • M.A. Zotova: M.Sc. student
  • K.V. Gorodnischev: M.Sc. student
  • N.N. Irtuganov: M.Sc, Ph.D. student
  • I.D. Mikheev: B.Sc. student
  • D.A. Paneke: B.Sc., M.Sc., Ph.D. student
  • A.A. Danilov: B.Sc., M.Sc., Ph.D. student

Publications đź“š

    1. A. V. Vinogradov, I. A. Artyukov, S. S. Borisova, N. N. Zorev, I. V. Kozhevnikov, I. F. Mikhailov, S. I. Sagitov, and A. I. Fedorenko, “Investigation Of Superpolished Surfaces By X-Ray Scattering,” Proceedings Of SPIE – The International Society For Optical Engineering 1140, 490-501 (1989).
    2. I. Artyukov, A. Vinogradov, and I. Kozhevnikov, “Efficiency Of Grazing-Incidence Optics – The Spiral Collimator,” Applied Optics 30, 4154-4157 (1991).
    3. I. Artyukov, A. Vinogradov, And I. Kozhevnikov, “Maximum Efficiency Of Moving Incidence X-Ray Optics – Spiral Collimators,” Izvestiya Akademii Nauk Sssr Seriya Fizicheskaya 55, 824-828 (1991).
    4. I. Artyukov, L. Balakireva, F. Bijkerk, A. Vinogradov, N. Zorev, I. Kozhevnikov, V. Kondratenko, O. Ogurtsov, A. Ponomarenko, and A. Fedorenko, “Projection X-Ray-Lithography On The Basis Of Point Sources,” Kvantovaya Elektronika 19, 114-127 (1992).
    5. I. Artyukov, A. Vinogradov, And S. Suckewer, “Ray Tracing Computer-Simulation For X-Ray Applications,” In Ultrashort-Wavelength Lasers (1992), Pp. 161-165.
    6. I. A. Artyukov, A. I. Fedorenko, V. V. Kondratenko, S. A. Yulin, And A. V. Vinogradov, “Soft X-Ray Submicron Imaging Experiments With Nanosecond Exposure,” Optics Communications 102, 401-406 (1993).
    7. B. Alaudinov, I. Artyukov, V. Asadchikov, A. Karabekov, And I. Kozhevniikov, “An Optical-Model Of A Surface In The X-Ray Range,” Kristallografiya 39, 605-616 (1994).
    8. I. Artioukov, I. Kozhevnikov, And F. Abeles, “Effects Of Near-Surface Transition Layer On X-Ray Reflection And Scattering,” In Optical Interference Coatings, Pts 1 And 2 (1994), Pp. 692-703.
    9. I. Artyukov, A. Vinogradov, A. Fedorenko, V. Kondratenko, S. Yulin, And S. Suckewer, “Soft-X-Ray Submicron Imaging Experiments With Nanosecond Exposure,” In Ultrashort Wavelength Lasers Ii (1994), Pp. 190-197.
    10. I. A. Artyukov, A. Y. Karabekov, I. V. Kozhevnikov, B. M. Alaudinov, And V. E. Asadchikov, “Experimental Observation Of The Near Surface Layer Effects On X-Ray Reflection And Scattering,” Physica B: Physics Of Condensed Matter 198, 9-12 (1994).
    11. I. Artioukov, A. Vinogradov, V. Asadchikov, Y. Kasyanov, R. Serov, A. Fedorenko, V. Kondratenko, and S. Yulin, “Schwarzschild Soft-X-Ray Microscope For Imaging Of Nonradiating Objects,” Optics Letters 20, 2451-2453 (1995).
    12. I. A. Artioukov And I. V. Kozhevnikov, “Effects Of Near-Surface Transition Layer On X-Ray Reflection And Scattering,” In Proceedings Of SPIE – The International Society For Optical Engineering, 1995), 154-175.
    13. I. A. Artyukov, V. E. Asadchikov, A. V. Vinogradov, Y. S. Kas?Yanov, V. V. Kondratenko, R. V. Serov, A. I. Fedorenko, And S. A. Yulin, “Reflective Soft X-Ray Microscope For The Investigation Of Objects Illuminated By Laser-Plasma Radiation,” Quantum Electronics 25, 919-922 (1995).
    14. I. A. Artioukov, V. E. Asadchikov, And I. V. Kozhevnikov, “Effects Of A Near-Surface Transition Layer On X-Ray Reflection And Scattering,” Journal Of X-Ray Science And Technology 6, 223-243 (1996).
    15. I. A. Artyukov, A. V. Vinogradov, V. V. Kondratenko, A. I. Fedorenko, And S. A. Yulin, “Soft X-Ray Imaging Of Submicron Structures,” Russian Microelectronics 25, 48-53 (1996).

Sangyeol Lee | human movement | Best Researcher Award

Published on by Global CAD Awards

Prof Dr . Sangyeol Lee |human movement |Best Researcher Award

 Prof Dr .Sangyeol Lee ,Kyungsung University / Department of Physical therapy,South Korea

Dr. Sangyeol Lee is a distinguished professor in the Department of Physical Therapy at Kyungsung University in South Korea. With extensive experience in physical therapy and rehabilitation sciences, Dr. Lee has contributed significantly to both academic research and clinical practice. His work focuses on advanced therapeutic techniques, patient-centered care, and the development of innovative rehabilitation protocols. Dr. Lee is also dedicated to mentoring future leaders in physical therapy and continues to be an influential figure in the field through his research, teaching, and professional service.

 

Professional Profiles:

Scopus

Education :

Ph.D., Department of Physical Therapy, Daegu University, Daegu, Korea (2006-2010)
I completed my doctoral studies in Physical Therapy at Daegu University, where my research focused on advanced therapeutic techniques and rehabilitation strategies.

M.S., Department of Physical Therapy, Daegu University, Daegu, Korea (2004-2006)
My master’s degree provided a solid foundation in physical therapy, emphasizing both clinical practice and research methodologies.

Professional Experience:

Professor, Kyungsung University, Busan, Korea (2012-Current)
At Kyungsung University, I have been dedicated to teaching Physical Therapy, contributing to the academic and professional development of students in the field. My tenure has allowed me to innovate teaching methods and mentor countless students.

Professor, Gimhae University, Gimhae, Korea (2010-2012)
Prior to my current position, I taught Physical Therapy at Gimhae University. This role involved curriculum development and the facilitation of practical and theoretical knowledge to aspiring physical therapists.

Recognitions:

  • Excellent Research Achievement Recognition (2017): Awarded for outstanding contributions to research in the field of physical therapy.
  • Excellent Educational Achievement Recognition (2015): Honored for excellence in educational performance and student engagement.
  • Albert Nelson Marquis Lifetime Achievement Award (2017): Recognized for lifetime achievements and significant contributions to the physical therapy profession

Affiliations and Certifications:

  • Editor in Chief, Korea Proprioceptive Neuromuscular Facilitation Association: Leading editorial responsibilities and contributing to the development of PNF techniques in Korea.
  • Editor, Korean Society of Physical Medicine: Involved in overseeing the publication of research and advancements in physical medicine.
  • Academic Director, Korean Society of Exercise Rehabilitation: Directing academic programs and initiatives within the society.
  • Certified Physical Therapist (Korea): Licensed to practice physical therapy in Korea.
  • Certified Caregiver (Korea): Qualified to provide care and support to individuals in need.
  • Certified Living Sports Instructor (Korea): Authorized to instruct in various living sports activities.

Publications:

1.Effects of 3D Postural Correction and Abdominal Muscle Contraction on the Symmetry of the Transverse Abdominis and Spinal Alignment in Patients with Idiopathic Scoliosis

2.A study on skin mobility according to joint movement: Variations in mobility according to joint motion range and correlation and influence with hydrica composition

3.Comparison among low intensity bridge exercises using suspension devices based on muscle activity and subjective difficulty

4.The effects of early-stage neurodevelopmental treatment on the growth of premature infants in neonatal intensive care unit

5.Effect of various wheelchair handle grip directions on muscle activities of upper body of assistant during movement on ascending and descending ramps

Saied Moghaddam |Computer Aided Design in Mechanical Engineering |Best Researcher Award

Published on by Global CAD Awards

Assist Prof Dr . Saied Moghaddam |Computer Aided Design in Mechanical Engineering |Best Researcher Award

Assist Prof Dr .Saied Moghaddam ,University of tehran,Iran

Dr. Saied Moghaddam is an esteemed Associate Professor at the University of Tehran, Iran, renowned for his expertise in [insert area of expertise, e.g., “computer science” or “chemistry”]. With an illustrious academic background, Dr. Moghaddam earned his [insert highest degree obtained, e.g., “Ph.D.”] from [insert institution] and has since dedicated his career to advancing research and education in his field.

 

Professional Profiles:

Scopus

Google scholar 

Education :

PhD in Mechanical Engineering,Iran University of Science and Technology, Tehran, Iran
February 2011 – May 2017,Thesis Title: “Analysis of Combined Turbulent Heat Transfer (Mixed Convection-Radiation) with Variable Properties in Channels Using Large Eddy Simulation”,M.Sc. in Mechanical Engineering,University of Tehran, Tehran, Iran
September 2009 – September 2011,Thesis Title: “Investigating Flow of Non-Newtonian Fluids in MHD Micropumps”,B.Sc. in Mechanical Engineering,University of Tehran, Tehran, Iran
September 2005 – September 2009

Research Summary:

Assistant Professor
Department of Food Technology, University of Tehran, Tehran, Iran
September 2018 – Present,Current research focus: CFD simulation of ultraviolet (UV) disinfection for liquid foods and beverages, with emphasis on non-Newtonian behavior and optimization of UV reactor geometry.Ph.D. Work,Examined effects of turbulence and thermal radiation interaction with variable properties in combined mixed convection–radiation heat transfer in channels.,Utilized Large Eddy Simulation (LES) and low Mach number approach.,Developed a solver in OpenFOAM.,Investigated the validity of neglecting turbulence-radiation interaction (TRI) and validity of Boussinesq approximation without radiation.M.Sc. Work,Investigated flow of Newtonian and non-Newtonian fluids on the performance of Magnetohydrodynamics (MHD) micropumps.,Utilized Power-Law and Oldroyd-B models for non-Newtonian behavior.,Considered circular and rectangular microchannel configurations.

Industry Experience:

Part-time Mechanical Engineer at Asiawatt company, Tehran, Iran.,Part-time R&D Engineer at Pakzist Modern company, Tehran, Iran.,Part-time R&D Engineer at Behjoo Yadak Toos company, Tehran, Iran.,Part-time R&D Engineer at Euroslot Pars company, Tehran, Iran.,Part-time Mechanical Engineer at Danial Petro company, Tehran, Iran.

Teaching Experience:

  • Heat Transfer
  • Numerical Computation
  • Engineering Mathematics
  • Differential Equations
  • Strength of Materials
  • Physics

.

Publications:

  1. Analytical solution of MHD micropump with circular channel
    • International Journal of Applied Electromagnetics and Mechanics, 2012.
  2. MHD micropumping of power-law fluids: A numerical solution
    • Korea-Australia Rheology Journal, 2013.
  3. Radiation Effects on Turbulent Mixed Convection in an Asymmetrically Heated Vertical Channel
    • Heat Transfer Engineering, 2016.
  4. On the Validity of Boussinesq Approximation in Variable Property Turbulent Mixed Convection Channel Flows
    • Heat Transfer Engineering, 2017.
  5. Interaction between turbulence and thermal radiation in combined heat transfer channel flows
    • Heat Transfer—Asian Res., 2019.
  6. Investigating Flow in MHD Micropumps
    • SN Appl. Sci., 2019.
  7. Heat Conduction in Sliding Contact at Start up and Stopping
    • Heat Transfer—Asian Res., 2020.
  8. MHD micropumping of viscoelastic fluids: an analytical solution
    • Korea-Aust. Rheol. J., 2021.

Burak Bal | machine design Award | Young Scientist Award

Published on by Global CAD Awards

Prof.Burak Bal | machine design Award | Young Scientist Award

Prof.Burak Bal,Abdullah Gul University,Turkey

As of my last update in January 2022, I don’t have specific information about Prof. Burak Bal from Abdullah Gul University in Turkey. It’s possible that he may have emerged into prominence or taken on new roles since then. For the most accurate and up-to-date information, I recommend checking the university’s official website or contacting them directly.

Professional Profiles:

Scopus

Education:

  • PhD in Mechanical Engineering, Koç University Graduate School of Sciences and Engineering, 2011-2015
  • BSc in Mechanical Engineering, Middle East Technical University, 2006-2011
  • Kayseri Science High School, TED Kayseri College Foundation Schools, 2003-2006

Research Interests:

  • Mechanical property-microstructure relationships
  • Multi-physics and multi-scale experimental and computational mechanics of materials
  • Physics and mechanics of materials in extreme environments
  • Mechanical deformation and microstructure evolution
  • In-situ microscopy
  • Fatigue and fracture

Research and Teaching Assistance:

  • Research Assistant at Koç University, Advanced Materials Group, Sep 2011 – Jun 2015
  • Teaching Assistant at Koç University, Mechanical Engineering Department, Sep 2011 – Jun 2015
  • Undergraduate Teaching Assistant at Middle East Technical University, Sep 2009 – Jun 2011

Consultancy and Industrial Experience:

  • Consultant at Aselsan A.S., Jan 2017 – Aug 2017
  • Summer Intern at Turkish Aerospace Industries, Inc. (TAI), Jun 2009 – Aug 2009
  • Summer Intern at NACE Machinery Co., Ankara, Jun 2008 – Aug 2008

Academic and Administrative Positions:

  • Project Scientist at University of California- Los Angeles (UCLA), Dec 2021 – Dec 2022
  • Head of Mechanical Engineering at Abdullah GĂĽl University, Feb 2020 – Present
  • Associate Professor at Abdullah GĂĽl University, Nov 2019 – Present
  • Vice Head of Mechanical Engineering at Abdullah GĂĽl University, Feb 2017 – Feb 2020
  • Assistant Professor at Abdullah GĂĽl University, Apr 2016 – Nov 2019

Publications:

1. M. F. Kapci, P. Yu, J. Marian, G. Liu, Y. Shen, Y. Li, B.Bal*, ”Edge Dislocation Depinning from Hydrogen Atmosphere in α-Iron” Scripta Materialia, Submitted.
2.S. A. C, M. F. Baltacioglu, F. C. Bayram, B.Bal, A. Isoglu, ”Effects of 3D Printing Process Parameters on the MechanicalBehaviorofPCLScaffolds”ProceedingsoftheInstitutionofMechanicalEngineers, PartE:Journal of Process Mechanical Engineering, Submitted.
3.DZagorac,JZagorac, MBDjukic,B.Bal,JCSchön,”Data-drivendiscoveryandDFTmodelingofFe4Hon the atomistic level”Procedia Structural Integrity, 54 (2024), 446-452.
4.M.S.Hasan,M.F.Kapci,B.Bal,M.Koyama,H.Bayat,W.Xu,“AnatomisticstudyontheHELPmechanism of hydrogen embrittlement in pure metal Fe” International Journal of Hydrogen Energy, 57 (2024), 60-68.
5.M.F. Baltacioglu, B. Cetin, B.Bal*, “The Effect of Strain Rate on the Hydrogen Embrittlement Susceptibility of Aluminum7075”Journal of Engineering Materials and Technology, 145 (2023), 1-7.
6. Leblebicioglu, K. Kilic, B.Bal, A. Kilavuz, “Finite Element Analysis of the Stress Distribution Associated WithDifferentImplantDesignsforDifferentBoneDensities”JournalofProsthodontics-ImplantEstheticand Reconstructive Dentistry, 31 (2022), 614-622.
7. Leblebicioglu, K. Kilic, B.Bal, A. Kilavuz, “Finite Element Analysis of the Stress Distribution Associated WithDifferentImplantDesignsforDifferentBoneDensities”JournalofProsthodontics-ImplantEstheticand Reconstructive Dentistry, 31 (2022), 614-622.
8.S. E. Thürer,J. Peddinghaus, N.Heimes,F.C.Bayram,B.Bal,J.Uhe,B.Behrens,H.J.Maier,C.Klose, ”Lateral AngularCo-Extrusion: GeometricalandMechanicalPropertiesofCompoundProfiles”,Metals,10(2020), 1162-1176.
9.G. Durkaya, H. Kurtuldu, B. Çetin, B.Bal*, “Development of an optical measurement system for surface depthmeasurementsandstudyoffocuseffectondeterminationofsteelinclusioncontentbyEN-10247”Optical Engineering, 60 (2021), 103104(1)-103104(8).